INNOVATION FOR BETTER LIFE  -DIMEX®
+86-400-887-6700
Home » News » How do you clean a upvc window?

How do you clean a upvc window?

Views: 0     Author: Site Editor     Publish Time: 2022-04-29      Origin: Site

One of the most common types of window frames nowadays is the uPVC. People prefer them more than any other type of window frames because of their durability and easy maintenance. Installing uPVC window frames can really open up your windows and make them look brighter, as long as they are kept clean. The most popular colour choice for households the white uPVC windows mainly because of the lower price. However, they have one fault: the white frames and sills need to be cleaned a lot more often than the darker ones because of how visible all the spots are in comparison. Be that as it may, the occasional cleaning and rejuvenation is not a difficult task to accomplish, it doesn’t take a lot of time and efforts. Yet, it’ll make a major difference in the way your windows and the facade of your home look.

It’s advisable to clean your windows every two or three months. However, in case the window frames are visibly covered in dust and smeared, then you can wash them by following our step-by-step guide and practical tips. Keep in mind that if you regularly clean the uPVC windows, you’ll prolong their lifespan and efficiency.

How to clean uPVC window frames?

Equipment that you will need:frames windows and doors manufacturer - DIMEX

●Old towels/ dust sheet;

●Ladder/ step stool;

●Vacuum cleaner/ extendable feather duster/ old paintbrush;

●Spray bottle;

●Hot water;

●Vinegar;

●Microfiber/ cotton cloth;

●uPVC Cleaner.

●The best way to clean uPVC window frames:

1. Open the window

Open the window as far as you can.

2. Vacuum the interior of the frame

As with uPVC windows, vacuum the interior of the frame to remove any built-up dirt and debris.

3. Lay down old towels or a dust sheet on the sill and on the floor to limit any damages.

4. Step on a ladder or use a step stool to reach higher spots.

5. Vacuum or brush with an extendable feather duster in every nook, around the hinge and the opening mechanism. Use the vacuum attachment with the soft brush to reduce the risk of scratching the uPVC frame. Or in case you don’t have one, use an old paintbrush to loosen any dust, dirt and cobwebs from the corners, then use the hose on the vacuum cleaner to clear it all away.

6. Mix 1 cup of vinegar with 4 cups of hot water in a clean spray bottle.

Spray the uPVC frames with the solution and leave it for 10 – 15 minutes to disintegrate the accumulated dirt.

7. Wipe off the grime with clean microfiber cloths.

Wipe off any excess water from the glass panel with lint-free cotton or microfiber cloth.

8. Apply uPVC cleaner to polish the frames and restore their shiny look.

How to rejuvenate uPVC window frames?

To revive your weathered uPVC windows colour back to white you will need:

●uPVC Restorer;

●Microfiber cloths;

●Sponge cloth;

●Bucket;

●Water.

If you have recently cleaned your window frames, but you still feel the need to polish and rejuvenate them, follow these steps:

1.Wipe off any surface debris with a wet microfiber or sponge cloth before applying the uPVC Restorer. In case you haven’t thoroughly cleaned the frames from grease and dirt beforehand, then follow the foregoing cleaning procedure.

2.Pour the uPVC Restorer onto a dampened cloth and work it into the surface. Apply to one single section at a time. Polish off with a clean and dry microfiber cloth.

3.Clean off any stains left from the uPVC Restorer on the glass around the frames by using a clean wet microfiber cloth.

What to avoid when cleaning uPVC surfaces?

Avoid using coloured synthetic cloths because you’re risking of colouring the plastic surface when applying the cleaning solution. Forget about using any caustic cleaning agents or abrasive creams, sponges and scouring pads.

You should never use bleach because it will discolour the uPVC window frames. Even small doses will cause a chemical reaction with the glossy surface of the plastic, creating a dull matt effect that can never be undone.

Another thing that will immediately ruin your frames are cellulose thinners because they will melt the plastic. Another product not suitable for the purpose is WD40, along with nail polish remover, methylated spirits and white spirits.

How to clean mould off your uPVC frames and sills?

Mould is extremely hazardous for your health. It is a major risk for:

●Babies, children and elderly people;

●People with respiratory problems like allergies and asthma;

●Those with existing skin disorders, such as eczema;

●People with a weakened immune system, such as those having chemotherapy.

The danger is quite real as it’s enough to only inhale or touch mould spores in order to get an allergic reaction or an asthma attack. Specialists advise all people vulnerable to mould and damp exposure to stay away from such places.

One of the most common areas where we see mould build-up is on and around the windows. Many people struggle with this problem, so here are the steps on how to remove mould from your uPVC window frames and sills.

Equipment for cleaning black mould on uPVC window frames:

Plastic dust sheet;  

Safety goggles;

Gloves;

Dust mask;

Vacuum cleaner;

Rubbing alcohol;

Cleaning cloths;

White vinegar;

Baking soda.

Cleaning uPVC window frames mould in 7 simple steps

1.Cover the sills and the floor with a plastic dust sheet to catch any falling mould spores. Then open the window for better ventilation.

2.Put on safety goggles, gloves and a dust mask to protect yourself from any released spores in the air.

3.In case the window frames and sills are dry, remove any loose spores with a vacuum cleaner by steadily running the nozzle of the hose over the glass, the frames and the sill. When finished, sanitize the vacuum cleaner extension with rubbing alcohol.

4.If the area affected by black mould is wet, wipe the frames and sills with a dampened cloth to remove the excess spores.

5.Spray the frames and sills with white vinegar and leave it for at least 5 minutes.

6.Sprinkle baking soda on a cleaning cloth and rub it in the areas affected by the mould. The acidity of the vinegar and the abrasiveness of the soda will kill the spores and clean them from your uPVC windows.

7.Wipe the surface with a clean dry cloth.

Takeaways

Here are some final thoughts and takeaways to consider when cleaning uPVC window frames and sills:

■Avoid using strong chemical solutions and abrasive materials. The best way to wash uPVC window frames is by mixing your own homemade window cleaner using only water and white vinegar.

■Vacuum at least twice a month your window sills to prevent the accumulation of dirt and save more time when doing your seasonal window cleaning.

■Always use protective gear when cleaning mould off window frames to prevent any allergic reactions and poisoning.

■To remove mildew from uPVC windows use vinegar and baking soda instead of strong chemicals to prevent any damages to the windows.

Having read through this guide to cleaning uPVC window frames, you now have everything you need to know to add that sparkle back to your home and be proud of your uPVC features.